*DISCLAIMER These adjustable racks are made to work with MOST bicycles. There MUST be a brake boss or fender drilling in the fork crown and you should use a 6x1mm bolt or a brake caliper to hold it in place. Dropout safety tabs may interfere with the strut’s axle bracket and may be ground off only if you’re competent enough to understand the basic principles of wheel attachment. Struts are drilled for either 9mm bolt-on axles or 5mm skewers and are not intended for Paul and Phil style bolt-on hubs. Sorry fellas. Adjustable racks are designed to carry loads of 10–20 pounds, or no more than what may reasonably fit on or in them. Not intended for passengers. No fair collecting scrap iron with one. Racks are made with your better judgment in mind.

Adjustable front rack designed for carrying loads too big or wide for the Errand Rack. Platform has no side rails so it’ll carry boxes, duffels, camp gear, and just about anything else. Lots of rails provide ample spots to tie-down, strap around, or hook onto. A loop in back keeps your load off the brake. The Camper has an adjustable strut configuration and works with either axles or skewers. Platform size is 10" x 14".

Click here to see complete installation instructions.

There are currently no Camper Racks in stock, sorry. Email me to reserve your Camper Rack from the next batch.

Price: $200.